Quick-Release vs All-Metal Fixed Dock — Vehicle Tablet Retention Comparison | TOPICON
Quick-release docks allow tool-less removal for shift-based workflows. All-metal fixed docks use threaded clamping for permanent installations under sustained vibration. Compare retention, sealing, contact wear, and integrated scanner options for fleet tablet deployment.
Product Specifications
2026-10-21
8-Inch vs 10-Inch Rugged Tablet for Vehicle Cabs — Visibility & Mounting | TOPICON
An 8-inch tablet fits the A-pillar without covering the near-side mirror. A 10-inch tablet shows more map and form data. This guide covers cab geometry, mounting position, and dock compatibility for fleet tablet selection.
Deployment Guides
2026-10-20
Beyond Navigation — How Deep CAN Bus Integration Transforms Industrial Vehicle Displays | TOPICON
Reading CAN Bus data is passive. Bi-directional control is active. Hardware requirements for deep CAN Bus integration in off-road, agricultural, transit, and mining vehicles — dual isolated CAN, 9–36V, SDK access.
Technology Comparison
2026-10-19
RS232 vs RS485 for Industrial Vehicle — Distance, Isolation, Multi-Drop | TOPICON
RS232 is point-to-point and short-run. RS485 supports multi-drop, longer cable, and differential signaling. This guide compares isolation, baud rate, and vehicle wiring for fleet tablet integration.
Technology Comparison
2026-10-14
Vehicle Camera Architecture — Dock-Connected Tablets vs External MDVR | TOPICON
Dock-connected tablets handle live assistance and event capture. External MDVR handles continuous 24-hour recording. Compare thermal load, latency, storage, and CAN Bus integration for fleet video.
Technology Comparison
2026-10-13
CAN Bus vs OBD-II for Fleet Tablets — Data Depth, Wiring, and Diagnostics | TOPICON
OBD-II reads emissions and basic engine codes. CAN Bus J1939 exposes brake, transmission, and body data. This guide compares wiring, data rate, isolation, and fleet tablet integration.
Technology Comparison
2026-10-12
How to Choose an 8-Inch Rugged Tablet — Display, Power, Docking, GNSS | TOPICON
An 8-inch rugged tablet must fit the cab, read in sunlight, accept ignition power, and dock without tools. This guide covers brightness, CAN Bus, GNSS, and mounting.
Deployment Guides
2026-10-09
GNSS Hardware for Fleet Tablets — Dual-Band & Antenna Guide | TOPICON
L1-only receivers drift 20-50 metres in urban canyons. Dual-band L1+L5 reduces multipath error to metre level. External MMCX antennas and USB GPS receivers solve signal blocking in metal-bodied vehicles. This guide covers the GNSS hardware decisions for fleet and industrial tablet deployments.
Deployment Guides
2026-09-17
eSIM in Fleet Telematics — Cross-Border & Vibration Reliability
A physical SIM card in a truck cab endures eight hours of vibration per shift. The spring contacts in the SIM socket are the first component to fail. eSIM solders the profile to the board — and GSMA SGP.32 lets the carrier be switched remotely, without replacing the card.
Technology Comparison
2026-09-16
Recent articles
Vehicle-Mounted Mobile Data Terminal Trends 2025 | 5G MDT for Fleets | TOPICON
ELD Compliance: Why Rugged Tablets Matter for Fleet Management
Vehicle Mount Terminal Selection Guide – How to Choose the Right In-Vehicle Computing Platform
Mining Vehicle Computer Guide – Rugged Computing for Surface & Underground Operations
RS232 in Fleet Telematics – 5 Applications Where Serial Still Matters | TOPICON
Fixed Vehicle Terminals vs Docked Tablets – An Engineering Decision Guide | TOPICON
How System Integrators Build Recurring Revenue with White-Label Fleet Hardware | TOPICON
How to Push a Firmware Update to 500 Fleet Tablets Without Touching Any of Them
